Sharp SY-SAT50DV SD-AT50DV SYS-AT50DV Operation Manual - Page 45

Changing the registration in the remote control Sharp's TVs can be operated with the remote control of this system without registering the operation (except for some models). (See page 47.) You can also operate TVs of other manufacturers by changing the registration in the remote control. [Front] [Back] " Changing the TV registration Use buttons on both sides of the remote control. 1 While holding down the TV ON/STAND-BY button, press the TV CHANNEL button. 2 Enter the manufacturer setting number (2 digits) with the direct buttons (0 - 9) and press the TV ON/STAND-BY button. The setting is registered and the TV can be operated with the remote control of this system. SD-AT50 DX-AT50 ENGLISH Advanced Features - Changing the registration in the remote control - TV manufacturer SHARP PANASONIC JVC SONY MITSUBISHI HITACHI TOSHIBA PIONEER SANYO FUJITSU AIWA FUNAI SAMSUNG Setting number 01(*), 02 03, 04, 05 06, 07, 08 09 10, 11, 12, 13 14, 15, 16, 17 18, 19 20 21, 22, 23, 24 25 26 27, 28, 29, 30, 31, 32 33, 34, 35, 36 TV manufacturer EMERSON FISHER GE GOLDSTAR MAGNAVOX RCA ZENITH PHILIPS THOMSON GRUNDIG FERGUSON ITT NOKIA Setting number 37, 38, 39, 40 23 41, 42 43 44, 45 46, 47, 48, 49 50, 51 52, 53 54 55 56, 57 58, 59 LOEWE 60, 61 (*): The default manufacturer number is 01 (SHARP). Notes: ! As for manufacturers with 2 or more setting numbers, select one of those numbers with which you can operate the TV. ! The number will not be set unless the registration is completed within 30 seconds. In that case, try registration again. ! Once you set a number, the number previously memorized will be canceled. ! After replacing the batteries in the remote control, the registered number may automatically be set to 01 (SHARP). If it occurs, register the desired number again. ! Registration cannot be executed depending on TVs. Even if numbers can be set, some buttons may not work. E-40