Sharp SY-SAT50DV SD-AT50DV SYS-AT50DV Operation Manual - Page 46
Speaker settings
View all Sharp SY-SAT50DV manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
SD-AT50 DX-AT50 ENGLISH Speaker settings The speaker settings are not displayed on the TV screen. [Back] Advanced Features - Speaker settings - " Speaker size setting You can change the sizes of the speakers if they are not supplied ones. 1 Press the SETUP AMP button, and the or button to select "SP SIZE". Then press the ENT button. 2 Within 10 seconds, press the or button to select the desired speaker. The indicators of selected speakers flash. 3 Within 10 seconds, press the or button to select their sizes. To set sizes of other speakers, repeat the operation from step 2. Caution: To set the speaker size, set the sound mode to "STANDARD". Note: The recommended size is set for the supplied speakers. See the upper table on page 42 for other speakers. " Speaker delay setting When some of the speakers are at a different distance from the listening point, you can select the speaker delay to make it seem as though the speaker distances are the same. 1 Press the SETUP AMP button, and the or button to select "SP DELAY". Then press the ENT button. 2 Within 30 seconds, press the or button to select the desired speaker. 3 Within 30 seconds, press the or button to select the distance and press the ENT button. ! You can change the distance in 1 feet (0.3 m) steps. ! To set the distance of other speakers, repeat the operation from step 2. Measure the distance between each speaker and the listening position, and set the speaker delay. SW CT FL FR 10 feet 10 feet (3.3 m) (3.3 m) 10 feet (3.3 m) 10 feet (3.3 m) In the left illustration, the front speakers, center speaker, and subwoofer are positioned at 10 feet (3.3 m), and the surround speakers are at 12 feet (4 m) from the listening position. 12 feet (4 m) SL 12 feet (4 m) SR Note: See the lower table on page 42 for the adjustable range. E-41