Sharp UX-A260 UX-A260 Operation Manual - Page 60
Memory transmission - manual fax
View all Sharp UX-A260 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
Sending a Fax From Memory 6 When you are ready to begin transmission, press START/MEMORY . • A Transaction Report is automatically printed out after Broadcasting is completed. Check the "Note" column of the report to see if any of the locations are marked "Busy" or have a communication error code. If so, send the document to those locations again. Memory transmission You can also send a fax through memory when sending to a single location. This is convenient when sending to locations where the line is often busy, as it saves you from waiting to pick up the original document and frees the feeder for other operations. To send a fax through memory, load the document, press START/MEMORY , and then dial using one of the following methods: ♦ Press the number keys to enter the fax number and then press START/MEMORY . ♦ Press SPEED , enter a 2-digit Speed Dial number, and press START/MEMORY . ♦ Press repeatedly to select an auto-dial number and press START/MEMORY . ♦ Press once to select the last number dialed and press START/MEMORY . If the memory becomes full... If the memory becomes full while the document is being scanned, MEMORY IS FULL and SEE MANUAL will alternately appear in the display. ♦ Press START/MEMORY if you want to transmit the pages which have been stored up to that point in memory. The remaining pages will be ejected from the feeder. After transmission, the memory will be cleared and you can transmit the remaining pages. You will also need to transmit the page which was being scanned when the memory filled up. ♦ Press STOP if you want to cancel the entire transmission. 58