Sharp XE-A203 Programming Guide - Page 16

4. CHARACTER ASSIGNMENT METHOD ■ THE METHOD OF CHARACTER ENTRY AT TEXT PROGRAMMING The character can be entered by using character key or character code. When the character can be entered in the text programming, the key layout is changed from "Function and DEPT key layout" to "CHARACTER KEY LAYOUT". In "CHARACTER KEY LAYOUT", any key except the Numeric keys and [CL], [SBTL], [TL] are assigned either the character or the control key for character entry. Any character can be entered by following mathod. By character key: SHIFT (CHARACTER KEY) : Characters on Character key layout. NUMBER (NUMERIC KEY) : Numeric character ("0"), "1", . . . , "9") By Numeric key (Character Code) : xxx [00] xxx : Character Code (The list of Control Key) Key Action SHIFT Entry to shift the following character key. (ex. [SHIFT]) 3 [A] : Enter the character "a".) NUMBER Entry the following numeric key as the number character. (ex. [NUMBER] 3 [1]) : Enter the character "1".) (DC) Double size character: Change the following character to the double size character. BS Back Space : Delete the last character. The status of [SHIFT], [NUMBER] and [DC] are keeping until pushing same control key in each text entry. (STAY DOWN type) And the corresponding indication is lighted up on the display while their status is "on". (Example) [SHIFT] 3 [A] [B] [C] 3 [SHIFT] 3 [A] [B] [C] : Text "abcABC". [NUMBER] 3 [1] [2] [3] 3 [NUMBER] 3 [1] [2] [3] : Text "123" and numeric number 123. [DC] 3 [A] [B] [C] 3 [DC] 3 [A] [B] [C] : Text "ABCABC". XE-A203/A213 PROGRAM MODE 2 - 13