Sharp XE-A203 Programming Guide - Page 9

7) [AUTO] KEY PROGRAMMING max 25 AUTO (Free key) AUTO TL/NS Delete It must be pushed same [AUTO] key as the programming [AUTO] key at the end of any key entry. Note: [ESC] key cannot be set at [AUTO] key programming. It acts as a key of ERROR ESCAPE function in this programming. < [AUTO] key function > This machine has [AUTO] key which can be programmed the keysequence data. When [AUTO] key is depressed, the machine works as same as the programmed key-sequence is entered. Executing mode : REG, MGR, OPXZ, X1/Z1, X2/Z2 Setting mode : PGM 8) EURO STATUS FUNCTION The ECR has a EURO STATUS in the preset memory. It is changed by EURO CHANGING JOB and confirmed by EURO STATUS READING JOB at Z2 mode. Refer XZ report section. 9) DATE/TIME PROGRAMMING XE-A203V: XXXXXXXX DATE #/TM/ST XE-A213V: HHMM TIME XXXXXXXX DATE ST HHMM TIME DATE) XXXXXXXX: YYYYMMDD or DDMMYYYY or MMDDYYYY (YYYY: 2000-2099) (MM: 01-12) (DD: 01-31) The date entry format complies with PGM-mode. TIME) HH: Hour (00 to 23) MM: Minute (00 to 59) MRS = DATE: 01012000 (DD/MM/YYYY) TIME: 0000 10) VARIOUS PROGRAMMING There are programmed by depressing [#/TM/ST] (XE-A203V) or [#/ST] (XEA213V) key after a data that want to set. And it is operated continuously until depressing the [TL/NS] key. (Programming Sequence) XE-A203V: #/TM/ST AB 0 (NK) #/TM/ST TL/NS XE-A213V: ST AB 0 (NK) ST TL/NS AB : JOB No. NK : PROGRAMMING DATA. (Numeric Keys) [JOB#1] MACHINE No. (6digits) -- XXXXXX -- MRS = 000000 [JOB#2] CONSECUTIVE No. (6digits) -- XXXXXX -- MRS = 0000 [JOB#5] FUNCTION SELECT -- ABCDEFGH -- MRS = 00000001 A: PO in REG mode ENABLE DISABLE B: RA in REG mode ENABLE DISABLE C: SUBTOTAL VOID in REG mode ENABLE DISABLE D: INDIRECT VOID in REG mode ENABLE DISABLE E: DIRECT VOID in REG mode ENABLE DISABLE F: REFUND in REG mode ENABLE DISABLE G: NO SALE in REG mode ENABLE DISABLE H: FRACTIONAL QUANTITY YES (3digits decimal place) NO A 0★ 1 B 0★ 1 C 0★ 1 D 0★ 1 E 0★ 1 F 0★ 1 G 0★ 1 H 0★ 1 XE-A203/A213 PROGRAM MODE 2 - 6