Sharp XG C40XU XG-C40XU Operation Manual - Page 16
Connecting the Projector, To a DTV decoder or DVD player
View all Sharp XG C40XU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Setup & Connections Connecting the Projector To a DTV decoder or DVD player 1 Connect one end of the 3RCA to 15 pin D-sub cable to the INPUT 1 or 2 port on the projector. 2 Connect the other end to the corresponding terminals on the video source. 3 To use the built-in audio system, connect one end of the audio cable (commercially available) to AUDIO INPUT terminal for INPUT 1, 2 on the projector. Connect the other end to the Audio output terminal on the video source. Select "Computer/RGB" or "Component" for "Signal Type" on the GUI menu, depending on the video source. 3RCA to 15 pin D-sub cable (sold separately) 2 To video input terminals Audio cable (commercially available) To audio output terminals DTV decoder or DVD player Connecting an amplifier and other audio components CAUTION • Always turn off the projector while connecting to audio components, in order to protect both the projector and the components being connected. • By using external audio components, the volume can be amplified for better sound. • The AUDIO OUTPUT terminal allows you to output audio to audio components from the selected AUDIO INPUT terminal for INPUT 1, 2 or AUDIO INPUT terminals for INPUT 3, 4 connected to audiovisual equipment. Audio cable (commercially available) To audio input terminals Amplifier E-15