Sharp XG C40XU XG-C40XU Operation Manual - Page 52
Resetting the lamp timer, Connect the power, cord., Remove the lamp cage cover.
View all Sharp XG C40XU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Replacing the Projection Lamp 7 Remove the lamp cage cover. 8 Remove the lamp cage. Turn over the projector and loosen the user service screw that secures the lamp cage cover. Then slide the cover in the direction of the arrow. Remove the securing screws from the lamp cage. Hold the lamp cage by the handle and pull it towards you. User service screw 9 Insert the new lamp cage. Press the lamp cage firmly into the lamp cage compartment. Fasten the securing screws. Securing screw Securing screw 10 Attach the lamp cage cover. Slide the lamp cage cover in the direction of the arrow. Then tighten the user service screw. User service screw Resetting the lamp timer 1 Connect the power cord. Plug the power cord into the AC socket of the projector. 2 Reset the lamp timer. While pressing ƒ, © and ENTER on the projector, press POWER ON on the projector. "LAMP 0000H" is displayed, indicating that the lamp timer is reset. Ł • Reset the lamp timer only after replacing the lamp. Maintenance & Troubleshooting E-51