Sharp XG C40XU XG-C40XU Operation Manual - Page 20

Basic Operations, INPUT, VOLUME, POWER OFF - replacement lamp

Get Sharp XG C40XU - Notevision XGA LCD Projector PDF manuals and user guides View all Sharp XG C40XU manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Operation Basic Operations 4 3 3 Slide the zoom knob. The image can be adjusted to the desired size within the zoom range. 4 Slide the focus knob until the image on the screen becomes clear. 6 7 8 5 EXAMPLE 5 INPUT 1 Mode d INPUT 4 (S-VIDEO) Mode 6 INPUT 2 Mode g f INPUT3 (VIDEO) Mode s 7 8 5 Press INPUT to select the desired input mode. Press INPUT again to change the mode. • When no signal is being received, "NO SIGNAL" will be displayed. When a signal that the projector is not preset to receive is being received, "NOT REG." will be displayed. 6 Press VOLUME to adjust the volume. 7 Press MUTE to temporarily turn off the sound. Press MUTE again to turn the sound back on. 8 Press POWER OFF. Press POWER OFF again while the message is displayed. • If you accidentally pressed POWER OFF and do not want to turn off the power, wait until the power off screen disappears. • When POWER OFF is pressed twice, the POWER indicator will illuminate red and the cooling fan will run for about 90 seconds. The projector will then enter standby mode. • Wait until the cooling fan stops before disconnecting the power cord. • The power can be turned on again by pressing POWER ON. When the power is turned on, the POWER indicator and the LAMP REPLACEMENT indicator illuminate green. • The POWER indicator flashes if the bottom filter cover is not securely installed. E-19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
E-19
Operation
Basic Operations
4
3
3
Slide the zoom knob. The image can be adjusted
to the desired size within the zoom range.
4
Slide the focus knob until the image on the screen
becomes clear.
5
Press
INPUT
to select the desired input mode.
Press
INPUT
again to change the mode.
EXAMPLE
•
When no signal is being received,
“
NO SIGNAL
”
will be
displayed. When a signal that the projector is not preset
to receive is being received,
“
NOT REG.
”
will be displayed.
6
Press
VOLUME
±
/
²
to adjust the volume.
7
Press
MUTE
to temporarily turn off the sound.
Press
MUTE
again to turn the sound back on.
8
Press
POWER OFF
.
Press
POWER OFF
again while the message is
displayed.
•
If you accidentally pressed
POWER OFF
and do not want
to turn off the power, wait until the power off screen
disappears.
•
When
POWER OFF
is pressed twice, the POWER indicator
will illuminate red and the cooling fan will run for about 90
seconds. The projector will then enter standby mode.
•
Wait until the cooling fan stops before disconnecting the
power cord.
•
The power can be turned on again by pressing
POWER
ON
. When the power is turned on, the POWER indicator
and the LAMP REPLACEMENT indicator illuminate green.
•
The POWER indicator flashes if the bottom filter cover is
not securely installed.
6
7
8
5
5
INPUT 1 Mode
f
d
g
s
INPUT 4
(S-VIDEO) Mode
INPUT3
(VIDEO) Mode
INPUT 2 Mode
6
7
8