Sharp XL 1700 Service Manual - Page 9

XL-1700/1700C REMOVING AND REINSTALLING THE MAIN PARTS How to remove the CD lid (See Fig. 9-1.) Perform steps 1 to 13 of the disassembly method to remove the gear box.(See page 7,8) 1. Remove the screws (A1) x 2 pcs., to remove the CD lid motor. 2. Remove the hooks (A2) x 3 pcs., to remove the worm wheel. Caution: Be careful so that the gear is not damaged. (The damage gear emits noise during searching.) Hook (A2) x3 Worm Wheel (A1) x2 ø2 x3mm CD MECHANISM SECTION (See Fig. 9-2.) Perform steps 1 to 9 of the disassembly method to remove the CD mechanism.(See page 7,8) 1. Remove the mechanism cover, paying attention to the pawls (A1)x 4 pcs. 2. Remove the screws (A2) x 2 pcs., to remove the shaft (A3) x 1 pc. 3. Remove the stop washer (A4) x 1 pc., to remove the gear (A5) x 1 pc. 4. Remove the pickup unit. Note: After removing the connector for the optical pickup from the connector, wrap the conductive aluminium foil around the front end of connector remove to pretect the optical pickup from electrostatic damage. CD Lid Motor Figure 9-1 (A1) x4 Mechanism Cover (A2) x2 ø2.6 x6mm CD Mechanism Shaft (A3) x1 Gear (A5) x1 Stop Washer (A4) x1 Pickup unit Figure 9-2 - 9 -