Sharp XR-10 XG-MB55X Operation Manual - Page 47
Adjusting the Projector Function (“PRJ - ADJ” menu), Auto Search Function
View all Sharp XR-10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Adjusting the Projector Function ("PRJ - ADJ" menu) Picture SCR - ADJ Auto Search Auto Sync Auto Power Off System Sound Speaker RS-232C Fan Mode System Lock PRJ - ADJ On On On On On 9600 bps Normal Menu operation n Page 37 Help Lamp Timer(Life) 0h 100% SEL./ADJ. ENTER END 1 Auto Search Function This function automatically searches for and switches to the input mode in which signals are being received, when the projector is turned on, or when the INPUT button is pressed. Note When "Auto Search" is set to "On" • If two or more input signals are found, the pro- jector selects the input source in the order of INPUT 1 n INPUT 2 n INPUT 3 n INPUT 4 when you press INPUT (P/R) on the projector. • While "Auto Search" is set to "On", press C INPUT 1,C INPUT 2, D INPUT 3 or EINPUT 4 on the remote control to select an input mode other than the input mode selected by the projector. 3 Auto Power Off Function Selectable items On Off Description When no input signal is detected for more than 15 minutes, the projector will automatically enter standby mode. The Auto Power Off function will be disabled. Note • When the Auto Power Off function is set to "On", 5 minutes before the projector enters standby mode, the message "Enter STANDBY mode in X min." will appear on the screen to indicate the remaining minutes. 2 Auto Sync (Auto Sync Adjustment) 4 Setting the Confirmation Sound (System Sound) Useful Features Selectable items On Off Description Auto Sync adjustment will occur when the projector is turned on or when the input signals are switched, when connected to a computer. Auto Sync adjustment is not automatically performed. Note • Auto Sync adjustment is also performed by pressing F AUTO SYNC on the remote control. • The Auto Sync adjustment may take some time to complete, depending on the image of the computer connected to the projector. • When the optimum image cannot be achieved with Auto Sync adjustment, use manual adjustments. (See page 46.) Selectable items On Off Description A confirmation sound is made when the projector turns on/off. No confirmation sound is made. 5 Speaker Setting Selectable items On Off Description The audio signal is output from the internal speaker. The audio signal is not output from the internal speaker. 43