Singer 1 One Instruction Manual 39 - Page 20
Chaining, Sewing
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
12. CHAINING OFF AND TEST SEWING * When the machine is completely threaded, bring all of the threads over the throat plate and slightly to the left under the presser foot. * Hold the threads and apply a slight tension. Turn the hand wheel toward you 2 or 3 complete turns to start the thread chain. * Lower presser foot. /\ * Continue holding the chain and press on the foot \\0 control until the chain is 5. 7.5 cm (2 - 3 inches) in length. * Place fabric under the front of the presser foot and sew a test sample. Note: Do not pull on the fabric while sewing as this may deflect the needle, causing it to break. 5, ''' 7.5cry7 0 ¢". * At the end of the sample, continue to run the machine with the presser foot down until the chain reaches 5 - 7.5 cm (2 - 3 inches) in length. * Clip the thread chain. Note: Anytime you have rethreaded the machine always chain off and sew a test sample to test tensions and make adjustments as necessary. 1 18