Singer 1 One Instruction Manual 39 - Page 30
Additional, Information, About, Rolled, Hemming, Secure, Thread, Chain
![]() |
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
When the lower looper thread is too loose - Turn the lower looper thread tension dial (yellow) toward a higher number. - Or, turn the upper looper thread tension dial (orange) to a lower number. * When the needle thread is too loose - Turn the needle thread tension dial (green) to a higher number. Needle thread Upper looper thread Topside is riC Lower looper thread Underside Upper looper thread Topside Lower looper thread Needle thread Underside • ADDITIONAL INFORMATION ABOUT ROLLED HEMMING * Hold the thread chain when you begin sewing to keep it from curling into the seam. \. * Place a slight tension on the material in the sewing direction and a finer seam finish can be obtained. * The minimum overedge stitch width that can be obtained for rolled hemming is approximately 1.5 mm (1/16 inch) since the cutting width cannot be set below 3.5mm (9/64 inch). * TO SECURE THE ROLLED HEM THREAD CHAIN * Apply a small drop of liquid seam sealant to the end of the seam. Allow to dry, then cut the chain close to the stitches. Note: Test the liquid seam sealant for color fastness before use. 28
![](/manual_guide/products/singer-1-instruction-manual-39-5af8d6f/30.png)