Singer 1 One Instruction Manual 39 - Page 33
Overlock, Blind, Tucks
View all Singer 1 One manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
• HOW TO SEW AN OVERLOCK BLIND HEM The excess fabric is trimmed and the hem is sewn and the raw edges are overlocked in one operation. The overlock blind hem is best suited for sewing knit wear. It provides a durable finish that is almost invisible. Topside * Remove the left needle and adjust machine for a narrow three-thread overlock stitch. Note: The three-thread flatlock stitch can also be used. * Set the stitch length dial at 4 - 5. * Fold the hem to the wrong side of the fabric, then back to the right side with 6mm (1/4") beyond the fold. * Stitch on the extended hem edge, allowing the machine needle to barely catch the edge of the fold. Note: An optional blind hem foot (ULTRA HEM FOOT) is available. (page 45) e Remove Underside 5 0 0 • HOW TO SEW PIN TUCKS Sew decorative pin tucks on the fabric before cutting out the garment. * Remove the left needle and adjust machine for a narrow three-thread overlock stitch. Note: The rolled hem stitch can also be used for this technique. * Place the movable upper knife in the non-operating position (page 23). * Mark the fabric with the desired number of pin tucks using a water soluble fabric marker. 0 0 Remove 31