Singer 7469Q Confidence Quilter Instruction Manual - Page 12

SPOOL PINS HORIZONTAL SPOOL PIN for normal thread spools Place thread spool on the pin and secure with a spool cap to ensure smooth flow of thread. If the thread spool has a thread retaining slit, it should be placed to the right. Select the correct spool pin cap according to the type and diameter of spool being used. The diameter of the spool pin cap should always be larger than that of the spool itself. Spool Bobine Carrete Spool pin felt discs Rondelle feutre Disco del pasador carrete Vertical spool pin Porte-bobine vertical Pasador de carrete vertical Thread retaining slot Fente de retenue de fil Ranura de retención de hilo VERTICAL SPOOL PIN for large thread spools Attach the spool pin and place a felt disc over it. Place a spool of thread on the spool pin. Spool pin cap Couvre-fil Tapa del pasador carrete Spool Bobine Carrete Spool pin Porte-bobine Pasador carrete PRESSER FOOT LIFTER There are three positions for your presser foot. 1. Lower the presser foot to sew. 2. Raise the lifter to the middle position to insert or remove fabric. 3. Lift it to its highest position to change the presser foot or to remove thick fabric. FEED DOG CONTROL The feed dogs control the movement of the fabric that is being sewn. They should be raised for all general sewing purposes and lowered for darning, freehand embroidery and monogramming so that you, not the feed dogs, are guiding the fabric. 12