Singer 7469Q Confidence Quilter Instruction Manual - Page 70
Manual Buttonhole
View all Singer 7469Q Confidence Quilter manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 70 highlights
CORDED BUTTONHOLES Hook filler cord (crochet thread or buttonhole twist) over the spur and pull both ends of the cord forward under the foot and tie off the cord as shown in the illustration. Sew buttonhole so that zigzag stitches cover the cord. When completed, release the cord from foot and snip off extra length. Spur Saliente Tige MANUAL BUTTONHOLE * Use the automatic buttonhole foot up to 1 3/4 "(45 mm) in length, but don't lower the buttonhole lever or a beep will sound. * Use the satin foot to create larger buttonholes. * Carefully mark the buttonhole length on your garment. Place the fabric with the buttonhole marked under the buttonhole foot. Slide the foot forward so that the needle pierces the fabric at the beginning of the buttonhole. PROCEDURE 1. Start the machine to form first bartack and left side of buttonhole. 2. Sew second bartack and stitch backward until needle reaches beginning of buttonhole. 3. Stitch forward to the end of buttonhole mark to complete buttonhole. 4. Push the reverse stitch switch to tie off the stitches. NOTE: If stitch length is manually set at 0.75 (mm) for step 1, set the stitch length at 0.75 (mm) for step 3 as well. Buttonhole foot Pied boutonnière Prensatelas de ojales 1 2 3 4 70