Singer C240 FEATHERWEIGHT Instruction Manual and Troubleshooting Guide - Page 10
Free Arm, Leveling the Machine Base Plate, Thread Cutter, Spool Pins
View all Singer C240 FEATHERWEIGHT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Free Arm To use the free arm, slide off the removable storage compartment. When attached, a hook keeps the removable storage compartment securely attached to the machine. Take off the removable storage compartment by sliding it to the left. Leveling the Machine Base Plate To make sure your machine stands steadily on your sewing surface you can adjust the base plate height. Turn the base plate adjusting screw (A) by hand. Turn clockwise to lower and counter-clockwise to raise the base plate. Thread Cutter To use the thread cutter, pull the thread from back to front as shown (B). A B Spool Pins Your machine has two spool pins, a main spool pin and an auxiliary spool pin. The spool pins are designed for many types of thread. The main spool pin is used in a horizontal position. (the thread reels off the spool). The horizontal position can be used for most sewing and embroidery threads. The auxiliary spool pin is used in a vertical position. Main Spool Pin Place a spool cap and the thread spool on the spool pin. Make sure that the thread reels over the top and slide on the second spool cap. Use a spool cap slightly larger than the thread spool. For narrow thread spools, use a smaller spool cap in front of the spool. For large thread spools, use a larger spool cap in front of the spool. The flat side of the spool cap should be pressed firmly against the spool. There should be no space between the spool cap and the thread spool. 10 Large spool cap Small spool cap