Singer C240 FEATHERWEIGHT Instruction Manual and Troubleshooting Guide - Page 11
Bobbin Winding
View all Singer C240 FEATHERWEIGHT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Auxiliary Spool Pin The auxiliary spool pin is used when winding a bobbin thread from a second spool of thread or for a second spool when sewing with a twin needle (Twin needle not included). It can also be used for many specialty threads. Insert the auxiliary spool pin onto the end of the bobbin winding spindle (A). Aling the notch (B) with the spring (C) on the bobbin winding spindle. Install the second thread spool onto the auxiliary spool pin. B C A Auxiliary spool pin. Bobbin Winding 1. Place the thread spool on the spool pin in horizontal position. Slide a spool cap tightly against the spool. 2. Place the thread into the thread guide (A) from front to back. Pull the thread counter-clockwise around the bobbin winder tension disc (B). 3. Thread through the hole in the bobbin (C) from the inside to the outside. 4. Place an empty bobbin on the bobbin winding spindle. 5. Push the bobbin winding spindle to the right to wind. The letters "SP" flash on the LED display (D). Press the foot control to wind the bobbin. When the bobbin is full, release the foot control. Push the bobbin winding spindle to the left. Remove the bobbin and cut the thread. C D A B 11