Singer C240 FEATHERWEIGHT Instruction Manual and Troubleshooting Guide - Page 7
Presser Feet
View all Singer C240 FEATHERWEIGHT manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Presser Feet General Purpose Foot 0A with Integrated Even Feed System (shown as in the display, attached on the machine upon delivery) This foot is used mainly for straight stitching and zigzag stitching with a stitch length longer than 1.0 mm. All Purpose Foot 1A with Integrated Even Feed System (shown as in the display) This foot is used for decorative stitches. The groove on the underside of the foot is designed to flow smoothly over the stitches. Satin Stitch Foot 2A (shown as in the display) When sewing decorative stitches or short zigzag stitches and other stitches with less than 1.0 mm stitch length, use this foot. The groove on the underside of the foot is designed to flow smoothly over the stitches. Blind Hem Foot 3 with Integrated Even Feed System (shown as in the display) This foot is used for blindhem stitches. The toe on the foot guides the fabric. The red guide on the foot is designed to ride along the fold of the hem edge. Zipper Foot 4 with Integrated Even Feed System This foot can be snapped on either the right or the left of the needle, making it easy to sew close to both sides of the zipper teeth. Move the needle position to the right or left to sew closer to zipper teeth. One-step Buttonhole Foot 5B (shown as in the display) This foot has a space in the back to set the size of the buttonhole. The machine will sew a buttonhole to fit that button size. Important: Make sure that the Integrated Even Feed System is disengaged when using presser foot 2A, 5B. 7