Singer Futura Quartet Instruction Manual - Page 45

Data 1, Data 4, Data 2, Data 3 - sewing embroidery machine

Get Singer Futura Quartet PDF manuals and user guides View all Singer Futura Quartet manuals
Add to My Manuals
Save this manual to your list of manuals

Page 45 highlights

3. Select a large design or individual design elements and arrange them in the hoop area on the screen. The example shown uses lettering and designs from the Design Library that is built into the software. (Additional numbered hoops will appear as the design parts flow out of the first hoop section). 4. The design data is sent to the machine for sewing one section at a time. Click on the "Transmit to Machine" tool on the tool bar. 5. The grey area (#1 Hoop) is the first of the embroidery data that is sent to the machine for sewing. Set fabric and stabilizer into the hoop, aligning cross lines of data 1 within the guide line markings of the hoop. (See figures 2 and 3). There are two sets of markings on the inner hoop. On each side of the hoop there is a Center Hoop line which indicates the exact center of the hoop. In each corner of the hoop there are markings which together define the maximum sewing area for Multiple Hooping. These marks are referred to as Guide lines. Guide lines are to be set on the horizontal and vertical cross lines on the fabric as shown. Fig. 3 Fig. 4 Guide line Center point line A Data 1 Guide line Data 2 C Guide line B Guide line Data 4 Data 3 45

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
45
3. Select a large design or individual design elements
and arrange them in the hoop area on the screen.
The
example shown uses lettering and designs from the
Design Library that is built into the software. (Additional
numbered hoops will appear as the design parts flow out
of the first hoop section).
4. The design data is sent to the machine for sewing one
section at a time.
Click on the “Transmit to Machine” tool
on the tool bar.
5. The grey area (#1 Hoop) is the first of the embroidery
data that is sent to the machine for sewing.
Set fabric and stabilizer into the hoop, aligning cross lines
of data 1 within the guide line markings of the hoop. (See
figures 2 and 3).
Data 1
Data 4
Data 2
Data 3
A
B
C
Fig. 4
Fig. 3
Guide line
Guide line
Guide line
Guide line
There are two sets of markings on the inner hoop.
On each side of the hoop there is a Center Hoop line
which indicates the exact center of the hoop.
In each corner of the hoop there are markings which
together define the maximum sewing area for Multiple
Hooping. These marks are referred to as Guide lines.
Guide lines are to be set on the horizontal and vertical
cross lines on the fabric as shown.
Center point line