Smeg SEU244ETB Instruction Manual 1 - Page 11
Preliminary operations, 3 Using the cooktop
View all Smeg SEU244ETB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
EN Use 2.2 Preliminary operations In order to remove any moisture that has accumulated during manufacturing, for a correct operation of the electronic circuits and the control keypad: 1. Remove the protective film from the appliance's external surfaces and the accessories. 2. Remove any labels (except the nameplate with the technical data). During the first connection to the mains supply, an automatic check is run that turns on all the lights for a few seconds. It may happen that the display shows the message to indicate that during factory testing the cooktop was turned off with the residual heat active. After 6 minutes this alert is automatically disabled. 2.3 Using the cooktop All the appliance's commands and controls are grouped together on the front panel. The cooktop is controlled using TouchControl sensor keys. The power of the cooking zones may be set at various levels. Lightly touch a symbol on the glass ceramic surface. Each correct touch is confirmed with a beep. Hot pots and pans should not cover the sensor keys because they might accidentally turn off the appliance. Switching on the cooktop To switch on the cooktop, hold the key for 3 seconds. If you do not turn on a burner in the 30 seconds after switching on the cooktop, the cooktop switches off automatically. 13