Smeg SEU244ETB Instruction Manual 1 - Page 16

Use Secondary menu The cooktop is equipped with a secondary menu that allows you to enable or disable certain settings: 1 = Automatic control lock: in this mode, one minute after the last action by the user the control lock is automatically enabled. 2 = Showroom: in this mode, the appliance turns off the heating elements and keeps the control panel active (useful for in-store demonstrations). Every minute, the display shows for one second. To use the cooktop normally, you must set this mode to . 3 = ECO-logic (on some models only): in this mode, the cooktop's electronics automatically adjust the power level in a way which respects the maximum power consumption limit set: 2.8 or 4 kW. To use the cooktop at maximum power, you must be set this mode to . At first installation, within two minutes after powering the cooktop, press and hold the Plus and Minus keys of the first cooking zone (next to the key). The cooking zone display shows the number of the setting currently being edited (1 = Automatic control lock, 2 = Showroom, 3 = ECO-logic) with its value on the side ( : enabled, : disabled). For example indicates that the Automatic control lock is disabled. Press the Plus or Minus keys to change the setting of the or values. If the ECO-logic setting is changed, you can select the following values (2.8 kW) (4 kW) (maximum consumption). To advance to and change the subsequent settings, press the key. if the cooktop is already installed and in use, turn off the cooktop's power. Turn the cooktop back on within two minutes and proceed as described above. 18