Smeg SEU244ETB Instruction Manual 1 - Page 15

EN Use Timer (on some models only) This feature allows you to program a timer which emits an acoustic signal at the end of the set time (1 to 99 minutes). 1. With the keypad turned off, press the key. The display shows the message to indicate you can change the timer. 2. Press the Plus or Minus keys to set the time of the desired timer (hold down the keys to speed up). 3. At the end of the set time, the cooktop will alert you with a series of beeps. To stop the beeping, press the key. 4. To disable the timer during the countdown you must reset its value using the Minus key. When the display shows , the timer is disabled. Overheating protection If you use the cooktop at full power for a long period, the electronics may have trouble cooling down, especially when the room temperature is high. In this case, a device cuts the power to the front cooking zones and the display flashes and . If the temperature of the electronic board does not decrease, the device cuts power to all the cooking zones and the display shows (only on some models). When the temperature returns below the safety levels, cooking can resume. Other functions If three or more controls are used simultaneously or for a long time (for example: when a pan is mistakenly put on them or from a water spill), an automatic device turns off all cooking zones (if turned on) and the display shows the error . Remove the cause of the error from the keys. 17