Snapper S22675 Operater's Manual - Page 9
Adjusting the Handle Height
View all Snapper S22675 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Adjusting the Handle Height 1. Remove the wingnuts (A, Figure 4), washers (not shown), and bolts (B) from the right and left handle brackets (C). B NOTE: Do not remove the lower set of handle hardware (D). D Assembly A C Figure 4: Removing the handle adjustment hardware 2. Adjust the handle to a higher or lower height A adjustment hole (A, Figure 5). for tion 3. Reinstall the bolts, washers and wingnuts removed t c in Step 1. No oduFigure 5: Height adjustment holes Repr (Components removed for clarity) en 9
9
Assembly
Adjusting the Handle Height
1. Remove the wingnuts (A, Figure 4), washers (not
shown), and bolts (B) from the right and left handle
brackets (C).
NOTE:
Do not remove the lower set of handle hard-
ware (D).
2. Adjust the handle to a higher or lower height
adjustment hole (A, Figure 5).
3. Reinstall the bolts, washers and wingnuts removed
in Step 1.
A
Figure 4: Removing the handle adjustment hardware
C
B
D
Figure 5: Height adjustment holes
A
(Components removed for clarity)
en
Not for
Reproduction