Sony BDP-S790 Operating Instructions - Page 40
Skype, Network connection, “Control for HDMI” (BRAVIA Sync), Internet after [Wi-Fi Protected Setup
View all Sony BDP-S790 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Skype There is severe humming or noise. , Set the volume of the connected TV lower. , Try moving the web camera with microphone away from the speakers of the connected TV. Network connection The player cannot connect to the network. , Check the network connection (page 18) and the network settings (page 36). You cannot connect your PC to the Internet after [Wi-Fi Protected Setup (WPS)] is performed. , The wireless settings of the router may change automatically if you use the Wi-Fi Protected Setup function before adjusting the settings of the router. In this case, change the wireless settings of your PC accordingly. interrupt the communication. Move the player away from such devices, or turn off such devices. The desired wireless router is not shown in the wireless network list. , Press RETURN to return to the previous screen, and try [Wireless Setup(built-in)] again. If the desired wireless router is still not detected, select [Manual registration]. The message [A new software version is available. Please go to the "Setup" section of the menu and select "Network update" to perform the update.] appears on the screen when turning the player on. , See "Network Update" (page 31) to update the player to a newer software version. You cannot start the PARTY STREAMING function. , Check that [PARTY Auto Start] is set to [On] in [Network Settings] (page 37). You cannot connect the player to the wireless LAN router. , Check if the wireless LAN router is on. , Depending on the surrounding environment, such as the wall material, radio wave receiving condition, or obstacles between the player and the wireless LAN router, the communication distance may be shortened. Move the player and the wireless LAN router closer to each other. , Devices that use a 2.4 GHz frequency band, such as a microwave, Bluetooth, or digital cordless device, may 40 "Control for HDMI" (BRAVIA Sync) The [Control for HDMI] function does not work (BRAVIA Sync). , Check that your TV is connected via the HDMI OUT 1 jack. If your TV is connected via the HDMI OUT 2 jack, BRAVIA Sync is disabled. , Check that [Control for HDMI] is set to [On] (page 35). , If you change the HDMI connection, turn the player off and on again.