Sony BKM-FW32 Operating Instructions - Page 25
CLOSED CAPTION closed caption, Owner, Display Location, Internet Protocol TCP/IP, Password
View all Sony BKM-FW32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
CLOSED CAPTION (closed caption) Displays closed captions. When PICTURE MODE is set to any of User1, User2 and User3, you can adjust the following items. Refer to the Operating Instructions for the FWD series as well. Contrast +/- buttons Adjusts the picture contrast. Brightness +/- buttons Adjusts the picture brightness. Chroma +/- buttons Adjusts color intensity. Phase +/- buttons Adjusts color tones. Setup window A dialog box prompting you to enter a Network Password appears. "Name: root" is preset as the factory setting without a password. The settings entered or changed in each window become valid after you click Apply located near the bottom of the window. You cannot enter special characters in this window. Owner Information Owner Enter information on the owner. Display Location Enter the location of the Display unit. Memo You can write comments or notes here. Time Time Enter the current time and the day of the week.* * For the FWD-50PX1/50PX1N, enter the current time only. Network Internet Protocol (TCP/IP) Under normal circumstances, set this item to "Obtain an IP address automatically (DHCP)." Enter the required value (address) if you set it to "Specify an IP address." Password Names and Passwords can be set individually for the Administrator and each User. The Name for the Administrator is permanently set to "root." Mail Report* If an error occurs inside the Display unit, the system immediately reports the error by sending an e-mail (Error Report). * Except for the FWD-50PX1/50PX1N. Address (Destination) Enter an e-mail address in each text box. The error report can be sent to four destinations at the same time. The maximum number of characters of each email address is 64. Mail Account Mail Address: Enter the e-mail address assigned to this device. The maximum number of characters of the address is 64. Outgoing Mail Server (SMTP) (SMTP server): Enter the address of the SMTP server. The maximum number of characters of the address is 64. Requires the use of POP Authentication before Send e-mail (POP before SMTP): Check the "POP before SMTP" check box when POP authentication is needed before connecting to the SMTP server. Ingoing Mail Server (POP3): Enter the address of the POP3 server to be used for POP Authentication (POP before SMTP). Operations from a Computer 11GB