Sony BKM-FW32 Operating Instructions - Page 27

Troubleshooting

Get Sony BKM-FW32 PDF manuals and user guides View all Sony BKM-FW32 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 27 highlights

Troubleshooting If the Display appears to be operating erratically, try to diagnose and correct the problem, refering to the following guide. If the problem still persists, consult with qualified Sony personnel. Symptom Causes and remedies A connection to the network is not established. • This device is not properly installed. t Push this device into the slot until it is firmly seated and tighten the two screws. • The cable is not properly connected to the Network connector. t Insert the plug of the cable to the connector firmly. • The network environment is not properly set up. t When you use the computer's web browser, check the network settings on the computer. Press and hold the RESET button for more than 3 seconds to clear the settings, and then configure the network environment again. • The cable used to connect this device to the network is not correct. t Use a straight cable or a crossover cable that is appropriate to your network environment. Troubleshooting 13GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
13
GB
Troubleshooting
Troubleshooting
If the Display appears to be operating erratically, try to diagnose and correct the problem,
refering to the following guide. If the problem still persists, consult with qualified Sony
personnel.
Symptom
A connection to the network is not
established.
Causes and remedies
•
This device is not properly installed.
t
Push this device into the slot until it is
firmly seated and tighten the two screws.
•
The cable is not properly connected to the
Network connector.
t
Insert the plug of the cable to the connector
firmly.
•
The network environment is not properly set
up.
t
When you use the computer’s web browser,
check the network settings on the computer.
Press and hold the RESET button for more
than 3 seconds to clear the settings, and
then configure the network environment
again.
•
The cable used to connect this device to the
network is not correct.
t
Use a straight cable or a crossover cable
that is appropriate to your network
environment.