Sony BTA-NW1A Operating Instructions - Page 10
Setting up the unit
UPC - 027242605633
View all Sony BTA-NW1A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Setting up the unit You must make certain settings before you can connect the unit to your phone line. Choose the proper settings for your telephone signaling type. You also have to set the AREA CODE switches according to your area. 4 3 10-GB 1 (1) Before making the settings, check that the POWER ON/OFF switch is set to OFF. (2) Remove the battery cover. (3) Select the telephone signaling type with the TONE/PULSE10/PULSE20 selector. TONE: When your phone line has tone signaling. PULSE10: When your phone line has pulse signaling. PULSE20: Normally, this is not used. For details, see "To check the dial speed of a pulse dialing phone" on page 11. zTips •How can I tell if my phone has tone signaling? You can hear the touch pad sound from your phone when you press the number button. •How can I tell if my phone has pulse signaling? You can hear clicking sounds from your phone when you press the number button. (4) Set up the AREA CODE switches according to your area. For details, see "The setup of the AREA CODE switches" on page 11. (5) Replace the cover. The setting is completed. Notes •When the Bluetooth device you are communicating with can switch the telephone signaling type, set it to the same setting as the unit. Otherwise, the connection will not be established properly. •If the TONE/PULSE10/PULSE20 selector is not set to the appropriate position, you cannot communicate with any Bluetooth devices. •If you cannot check the dial speed of your pulse dialing phone, set the TONE/ PULSE10/PULSE20 selector to PULSE10.