Sony BTA-NW1A Operating Instructions - Page 14

Communicating with the Bluetooth device After registering a Bluetooth device, you can communicate with that Bluetooth device. 14-GB 1 (1) Set the POWER ON/OFF switch to ON. The lamps turn on as described below. (z: The lamp turns on) Communication standby with a Bluetooth device POWER (green) z m z ON LINE (orange) - m - (blue) - m z (2) Turn on the registered Bluetooth device and start communication. The lamps turn on or flash as described below. (z: The lamp turns on, : The lamp flashes) POWER (green) ON LINE (orange) (blue) z - z Dialing m m m z z Data transmission m m m z z z m m m Data communication complete z - z After using the unit Set the POWER ON/OFF switch to OFF to turn off the power. Notes •When using size AA alkaline dry batteries, the continuous communication time is approximately 60 minutes. •When the POWER ON/OFF switch is set to ON, the size AA alkaline dry batteries will be consumed even if the unit is not actually being used for communication. •Remove the size AA alkaline dry batteries when you do not intend to use the unit for a long time.