Sony BTA-NW1A Operating Instructions - Page 17

Specifications Wireless communication Communication system Bluetooth specification Ver. 1.1 Maximum communication speed 1) 2) Approx. 723 kbps Maximum output 3) Bluetooth specification Power Class1 Receiver sensitivity 3) - 70 dBm Communication distance 2) Approx. 10 m (32.8 feet) (Open space, when using a Sony Network Handycam with the Bluetooth function) Compatible Bluetooth profiles 4) Generic Access Profile Dial-up Networking Profile Usable frequency band 2.4 GHz band (2.400 - 2.4835 GHz) Exclusive modem card Applicable line Analog telephone line Interface for the telephone circuit 2 line ceremony interface NCU AA Dial type Pulse dialing (10/20 pps) Tone dialing NCU command AT command Communication format Dual Sending communication rate 300/1200/2400/4800/7200/9600/ 12000/14400/16800/19200/ 21600/24000/26400/28800/ 31200/33600 bps Receiving communication rate 300/1200/2400/4800/7200/9600/ 12000/14400/16800/19200/ 21600/24000/26400/28800/ 31200/33600/34000/34667/ 36000/37333/38000/38667/ 40000/41333/42000/42667/ 44000/45333/46000/46667/ 48000/49333/50000/50667/ 52000/53333/54000/54667/ 56000 bps Modulation mode standard ITU-T V.21/V.22/V.22bis/V.32/ V.32bis/V.34/V.90, BELL 212A/ 103, K56flex™ Sender sensitivity -10 to -15 dBm Receiver sensitivity -10 to -40 dBm Error correction MNP Class 4/10, ITU-T V.42 Data compression MNP Class 5, ITU-T V.42bis General Power sources AC power adaptor or two size AA alkaline dry batteries Battery life (connecting 5)) Approx. 60 minutes 6) Battery life (waiting 7)) Approx. 90 minutes 6) Power requirements 5.5 to 6.5 V (DC input) or two size AA alkaline dry batteries Power consumption 290 mA (During communication, using DC 6 V input), 200 mA (During waiting, using DC 6 V input) Dimensions Approx. 115×20×88 mm (4 5/8×13/16×3 1/2 inches) (w/ h/d) Mass Approx. 185 g (6.5 oz) (including size AA alkaline dry batteries and exclusive modem card) Operating temperature 0 to 40°C (32 to 104°F) 8) Storage temperature -20 to 60°C (-4°F to 140°F) Available Countries and areas Australia, Austria, Belgium, Canada, Denmark, Finland, France, Germany, Greece, Hong Kong, Ireland, Italy, Luxembourg, Malaysia, Netherlands, New Zealand, Norway, Portugal, Singapore, Spain, Sweden, Switzerland, Taiwan, UK, USA (Canada and France are for indoor use only.) AC power adaptor Power requirements (The type of your adaptor is shown on your adaptor.) AC-PT1: 120 V AC, 60 Hz (For customers in the USA and Canada), 230 to 240 V AC, 50 Hz (For customers in the UK), 220 to 230 V AC, 50/60 Hz (For other customers) AC-PW1: 110 to 240 V AC, 50/60 Hz Rated output voltage DC 6 V, 880 mA (AC-PT1) or 1.3 A (AC-PW1) Accessories Exclusive modem card (MDM5614G) (1) Exclusive modem cable (1) AC power adaptor (AC-PT1 or AC-PW1) (1) AC power supply cord (1) 9) Size AA alkaline dry batteries (2) Operating instructions (1) 10) 1) The maximum rate defined by Bluetooth specification Ver. 1.1 2) Depends on obstacles between the Bluetooth devices, radio wave conditions, etc. 3) Without antenna gain 4) Defined by Bluetooth specification for intended use between the Bluetooth devices 5) The state where data is being transmitted. (The POWER ON/ OFF switch is set to ON.) 6) At room temperature when using the supplied Sony size AA alkaline dry batteries. 7) The unit is in communication standby with a Bluetooth device. (The POWER ON/OFF switch is set to ON.) 8) The size AA alkaline dry batteries are not usable at certain low temperatures. Use the AC power adaptor. 9) Supplied only for the AC-PW1 AC power adaptor 10)Two sets of operating instructions are supplied depending on the area. Design and specifications are subject to change without notice. 17-GB