Sony CCD-FX411 Primary User Manual - Page 13
Installing, Lithimm, Batte
View all Sony CCD-FX411 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing the Lithimm Batte To keep birth dates in the camcorder's memory as well as to activate the clock, lithium battery must be installed. 1 Remove the lithium battery holder located at the bottom of the camcorder. 2 Install the supplied CR2025 lithium battery with the + side facing down. +side -side 3 Put the lithium battery holder into the camcorder. Lithium battery life The battery will last for approximately 1 year in normal operation. When the lithium battery becomes weak, the e7 indicator will blink in the viewfinder screen for about 5 seconds when you set POWER to CAMERA. In this case, replace the battery with a Sony CR2025 or Duracell DL-2025. Use of any other battery may present a risk of fire or explosion. When replacing the lithium battery, keep the battery pack or other power source attached. Otherwise, readjustments of the date, time and birth dates will be necessary. To change the lithium battery Remove the lithium battery holder from the camcorder, and pull out the lithium battery and insert a new one. Warning Battery may explode if mistreated. Do not recharge, disassemble or dispose of in fire. Caution Keep the lithium battery out of the reach of children. Should the battery be swallowed, consult a doctor immediately. 13 Getting Started