Sony CCD-FX411 Primary User Manual - Page 47
Playing
View all Sony CCD-FX411 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Playing Back In the earlier section (page 20), we've explained the basic connection to your TV. Here, we will talk about several other ways of connection to TV depending on the type of TV you have. You can easily make a proper connection of camcorder and TV by using the supplied AC-V60A AC power adaptor. If you connect a TV not equipped with video/audio inputs, see page 20. Connecting a TV with Video/Audio Inputs How to connect a TV with video/audio inputs Use the supplied AC-V60A AC power adaptor and A/V connecting cable to connect to the TV. Make sure that the TV is turned off to prevent damage to the speaker. VHF/UHF Ise AUDIO IN VIDEO IN VIDEO OUT VMC-910MS/920MS (not supplied) AUDIO OUT 4 AC-V60A -0 2 1 Connect Video and Audio using the A/V cable between TV and AC power adaptor. If your TV is a monaural type, use the VMC-710M/720M A/V connecting cable (not supplied). 2 Connect the AC power adaptor to a wall outlet. 3 Attach the connecting plate of the AC power adaptor to the camcorder. 4 Set the CHARGE/VTR selector on the AC power adaptor to VTR (DC OUT). Note Perform only steps 3 and 4 when playing back a tape. You can keep the AC power adaptor and the TV connected when playing back a tape. 47 Advanced Camera Operation