Sony CCD-TR30 Primary User Manual - Page 10

discharging

Page 10 highlights

Tips for Using the Battery Pack Note on the Rechargeable Battery Pack The Battery Heats Up During charging or recording, the battery pack. heats up. This is caused by energy that has been generated and a chemical change that has occurred inside the battery pack. This is not cause for concern. Battery Care • Remove the battery pack from the camcorder after using the battery pack, and keep it in a cool place. When the battery pack is attached to the camcorder, a small amount of current flows to the camcorder even if the POWER switch is set to OFF, which shortens battery life. • The battery pack is always discharging even when it is not in use after charging. Therefore, you should charge the battery right before using the camcorder. How to Use the Switch on the Battery Pack This switch is provided so that you can mark the charged battery. Set the switch to the "no mark" position when charging is completed. Set the switch to the "red mark" position when the battery is used up (or in whichever direction you want to remind yourself). [c] The Life of the Battery Pack The battery pack can be fully charged and discharged about 500 times under normal temperatures. If the battery indicator flashes rapidly just after turning on the camcorder with a fully charged battery pack, the battery pack should be replaced with a new fully charged one. Charging Temperature You should charge batteries at temperatures from 50°F to 86°F (from 10. 0 to 30'C). Lower temperatures require a longer charging time. Note on Charging A Brand-new Battery A brand-new battery pack is not charged. Before using the battery pack, charge it completely. Before Recharging a Used Battery Pack • Make sure to use up the battery before recharging. • If recording is completed before the .iXt indicator appears in the viewfinder, you should remove the tape, set the POWER switch to CAMERA, turn STANDBY up, and leave the camcorder until the battery indicator flashes rapidly. • When you use the AC-S10 power adaptor, the DC-SIO car battery charger or BC-S10 portable battery charger, you can use the discharging function. • Charging the usable battery causes a lowering of battery capacity. Battery capacity can be recovered if you fully discharge and charge the battery again. After Long Storage Recharge the battery pack after a long period of storage. If the battery pack is charged fully but not used for a long time (about I year), it becomes discharged. Charge it again, but in this case the battery life will be shorter than normal. After several charging and discharging cycles, the battery life will recover its original capacity.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44

Tips
for
Using
the
Battery
Pack
Note
on
the
Rechargeable
Battery
Pack
The
Battery
Heats
Up
During
charging
or
recording,
the
battery
pack.
heats
up.
This
is
caused
by
energy
that
has
been
generated
and
a
chemical
change
that
has
occurred
inside
the
battery
pack.
This
is
not
cause
for
concern.
Battery
Care
Remove
the
battery
pack
from
the
camcorder
after
using
the
battery
pack,
and
keep
it
in
a
cool
place.
When
the
battery
pack
is
attached
to
the
camcorder,
a
small
amount
of
current
flows
to
the
camcorder
even
if
the
POWER
switch
is
set
to
OFF,
which
shortens
battery
life.
The
battery
pack
is
always
discharging
even
when
it
is
not
in
use
after
charging.
Therefore,
you
should
charge
the
battery
right
before
using
the
camcorder.
How
to
Use
the
Switch
on
the
Battery
Pack
This
switch
is
provided
so
that
you
can
mark
the
charged
battery.
Set
the
switch
to
the
"no
mark"
position
when
charging
is
completed.
Set
the
switch
to
the
"red
mark"
position
when
the
battery
is
used
up
(or
in
whichever
direction
you
want
to
remind
yourself).
[c]
The
Life
of
the
Battery
Pack
The
battery
pack
can
be
fully
charged
and
discharged
about
500
times
under
normal
temperatures.
If
the
battery
indicator
flashes
rapidly
just
after
turning
on
the
camcorder
with
a
fully
charged
battery
pack,
the
battery
pack
should
be
replaced
with
a
new
fully
charged
one.
Charging
Temperature
You
should
charge
batteries
at
temperatures
from
50°F
to
86
°
F
(from
10
.
0
to
30'C).
Lower
temperatures
require
a
longer
charging
time.
Note
on
Charging
A
Brand-new
Battery
A
brand-new
battery
pack
is
not
charged.
Before
using
the
battery
pack,
charge
it
completely.
Before
Recharging
a
Used
Battery
Pack
Make
sure
to
use
up
the
battery
before
recharging.
If
recording
is
completed
before
the
.iXt
indicator
appears
in
the
viewfinder,
you
should
remove
the
tape,
set
the
POWER
switch
to
CAMERA,
turn
STANDBY
up,
and
leave
the
camcorder
until
the
battery
indicator
flashes
rapidly.
When
you
use
the
AC
-S10
power
adaptor,
the
DC-SIO
car
battery
charger
or
BC
-S10
portable
battery
charger,
you
can
use
the
discharging
function.
Charging
the
usable
battery
causes
a
lowering
of
battery
capacity.
Battery
capacity
can
be
recovered
if
you
fully
discharge
and
charge
the
battery
again.
After
Long
Storage
Recharge
the
battery
pack
after
a
long
period
of
storage.
If
the
battery
pack
is
charged
fully
but not
used
for
a
long
time
(about
I
year),
it
becomes
discharged.
Charge
it
again,
but
in
this
case
the
battery
life
will
be
shorter
than
normal.
After
several
charging
and
discharging
cycles,
the
battery
life
will
recover
its
original
capacity.