Sony CDP-302 Operating Instructions - Page 18
Specifications
View all Sony CDP-302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
SPECIFICATIONS COMPACT DISC PLAYER System Compact disc digital audio system Disc Compact disc Laser diode properties Material : GaAlAs Wavelength . 780 nm Emission duration Continuous Laser output : Max. 0.6 mW* *This output is the value measured at a distance of about 1,6 mm from the objective lens surface on the optical pick-up block. Spindle speed 500 r.p.m. to 200 r.p.m. (CLV) Scan velocity 1.2 1.4 m/sec. Error correction Sony Super Strategy Cross In- terleave Reed Solomon Code Number of channels 2 D-A conversion 16-bit linear Frequency response 2 - 20,000 Hz ±-0.5 dB Harmonic distortion Less than 0.003 % (1 kHz) Dynamic range More than 96 dB Channel separation More than 95 dB Wow and flutter Below measurable limit Outputs Line outputs Output level 2 V rms (at MSB) Load impedance over 10 kilohms Headphones 28 rriW at 32 ohms Other jacks Remote control connectors (4-pin) Disc Track pitch 1.6 mrn Sampling frequency 44.1 kHz Quantization 16 bit linear quantizing/channel Modulation system EFM Transfer rate 2.03 Mbit/sec. (before modulation) General Power requirements 120 V ac, 60 Hz Power consumption 15 W AC outlet 1 unswitched, 100 watts max. Dimensions Approx. 430 x 80 x 335 mm (w/h/d) (17 x 31/4 ›c 131/4 in.) including projecting parts and con- trols Weight Approx. 6.7 kg (14 lb 13 oz), net REMOTE COMMANDER RM-D302 Remote control system Infrared control Power requirements 3 V dc with two batteries, size AA (IEC designation R6) Dimensions Approx. 67 x 175 x 18 mm (w/h/d) (23/4 x 7 x 3/4 inches) incl. projecting parts and controls Weight Approx. 145 g ( 5.1 oz) incl. bat- teries SUPPLIED ACCESSORIES Audio signal connecting cord (1) Remote control cord (1) Disc cleaning cloth (1) Sony New Super batteries SUM-3 (NS) (2) Joint for remote commander (1) Design and specifications subject to change without notice. 18