Sony CDP-CE500 Operating Instructions - Page 23

Additional Information The USB device is not recognized. • Turn off the player and reconnect the USB device, and then turn on the player. • You are using an unsupported USB device. • The USB device does not work properly. Refer to the USB device operating instructions for how to deal with this problem. Playback does not start. • Turn off the player and reconnect the USB device, and then turn on the player. • Press N to start playback. Files cannot be played back. • The audio file does not have the extension ".mp3," ".wma," ".m4a," ".mp4," or ".3gp." • The audio file is a multiple track audio file. • The file is a video file. • The data is not stored in MP3/WMA/AAC format. • The data is stored in WMA lossless/AAC lossless format. • USB storage devices formatted with file systems other than FAT16 or FAT32 are unsupported*. • If you use a partitioned USB storage device, only files on the first partition can be played. • Playback is possible up to 8 levels. • The number of folders has exceeded 255. • The number of files has exceeded 5,000. • Files that are encrypted or protected by passwords, etc., cannot be played back. * This player supports FAT16 and FAT32, but some USB storage devices may not support these file systems. For details, see the operating instructions of the USB storage device or contact the manufacturer. After you have attempted the prescribed corrective actions If the player still does not operate properly, or if other problems not described above occur, turn off the player, disconnect the AC power cord (mains lead) from the wall outlet (mains) for a few minutes, and then reconnect the AC power cord (mains lead) to the wall outlet (mains). 23US