Sony CDP-CE500 Operating Instructions - Page 24

Specifications - dimensions

Page 24 highlights

Specifications CD player section Laser Frequency response Dynamic range Harmonic distortion Semiconductor laser (λ = 780 nm) Emission duration: continuous 2 Hz to 20 kHz ± 0.5 dB More than 90 dB Less than 0.006% Laser Diode Properties Emission Duration: Continuous Laser Output: Less than 44.6 μW * This output is the value measurement at a distance of 200 mm from the objective lens surface on the optical pick-up block with 7 mm aperture. USB section Supported bit rate Sampling frequencies USB port MP3 (MPEG 1 Audio Layer 3): 32 kbps - 320 kbps, VBR WMA: 48 kbps - 192 kbps AAC: 48 kbps - 320 kbps MP3 (MPEG 1 Audio Layer 3): 32 kHz/ 44.1 kHz/48 kHz WMA: 44.1 kHz AAC: 44.1 kHz Maximum current: 500 mA Outputs ANALOG OUT DIGITAL OUT OPTICAL Jack type Maximum Load output level impedance Phono jacks 2 V (at 50 Over 10 kilohms) kilohms Optical output jack -18 dBm Wave length: 660 nm General Power requirements Power consumption Dimensions (approx.) (w/h/d) Mass (approx.) 120 V AC, 60 Hz 16 W 430 mm × 110 mm × 400 mm (17 in × 4 3/8 in × 15 3/4 in) incl. projecting parts 5.2 kg (11 lbs 1 oz) Supplied accessories Audio cord Remote commander Battery Red and white (1) RM-ASU100 (1) R6 (size-AA) (2) Design and specifications are subject to change without notice. • Standby power consumption: 0.3 W • Halogenated flame retardants are not used in the certain printed wiring boards. (1) Sony Corporation Printed in Malaysia

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24

Sony Corporation
Printed in Malaysia
(1)
Specifications
CD player section
Laser
Semiconductor laser (
λ
=
780 nm)
Emission duration:
continuous
Frequency response
2 Hz to 20 kHz ± 0.5 dB
Dynamic range
More than 90 dB
Harmonic distortion
Less than 0.006%
Laser Diode Properties
Emission Duration:
Continuous
Laser Output: Less than
44.6
μ
W
* This output is the value measurement at a
distance of 200 mm from the objective lens
surface on the optical pick-up block with 7 mm
aperture.
USB section
Supported bit rate
MP3 (MPEG 1 Audio
Layer 3): 32 kbps – 320
kbps, VBR
WMA: 48 kbps – 192 kbps
AAC: 48 kbps – 320 kbps
Sampling frequencies
MP3 (MPEG 1 Audio
Layer 3): 32 kHz/
44.1 kHz/48 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
USB port
Maximum current:
500 mA
Outputs
General
Power requirements
120 V AC, 60 Hz
Power consumption
16 W
Dimensions (approx.)
430 mm × 110 mm ×
400 mm
(w/h/d)
(17 in × 4 3/8 in ×
15 3/4 in) incl. projecting
parts
Mass (approx.)
5.2 kg (11 lbs 1 oz)
Supplied accessories
Audio cord
Red and white (1)
Remote commander
RM-ASU100 (1)
Battery
R6 (size-AA) (2)
Design and specifications are subject to change
without notice.
Jack type
Maximum
output level
Load
impedance
ANALOG
OUT
Phono
jacks
2 V (at 50
kilohms)
Over 10
kilohms
DIGITAL
OUT
OPTICAL
Optical
output
jack
–18 dBm
Wave
length:
660 nm
• Standby power consumption: 0.3 W
• Halogenated flame retardants are not used in the
certain printed wiring boards.