Sony CDP-CX225 Operating Instructions - Page 15
Playing Discs in a Group, Block Play
View all Sony CDP-CX225 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
GettPinlagyiSntgarCteDds Playing Discs in a Group (Block Play) You can classify discs in advance by artists, category, etc. when inserting discs into the slots, and play them only within the group (called "block") you specified. The player has eight blocks, and each slot is assigned to one of the blocks as shown below. Block number 1 2 3 4 5 6 7 8 Disc slot 1-25 26-50 51-75 76-100 101-125 126-150 151-175 176-200 You can enjoy Continuous, Shuffle or Repeat Play within a certain block. 1 Insert discs into the slot of the block you want, referring to the table. (See also "Inserting CDs" on page 6.) 2 Press one of the BLOCK 1-8 buttons to select the block. When using the remote, press BLOCK, the number button of the block you want, then ENTER. The block number appears in the display. 3 Press ·. Block Play starts from the disc which is the most upward number within a block and located closest to the playing position. You can start Block Play from the disc you want When you want to start Block Play from the disc you want, turn the JOG dial to select the disc, then press ENTER. To cancel Block Play Press the corresponding BLOCK 1-8 button. Note The block number does not appear if no disc is put into the block you specified. POWER BLOCK 1-8 · Number buttons · BLOCK ENTER 15