Sony CDP-CX225 Operating Instructions - Page 9

Basic Operations Basic Operations 5 Press ENTER to start playing. The selected disc is set to the playing position, and the player plays all the discs from the selected one (ALL DISCS) or all the tracks once (1 DISC). Adjust the volume on the amplifier. When you turn off the player by pressing the POWER switch (standby mode) The player remembers the last playing disc and the play mode (Continuous, Shuffle (see page 12) or Program (see page 13)). When you turn on the player again, therefore, the player plays the same disc in the same play mode. Note that the player does not remember this information, if you turn off the player by pressing the power switch of the amplifier or receiver while the AC power cord is connected to the switched AC outlet of the amplifier or receiver. Display information while playing a disc While playing a disc, the display shows the current disc number, track number, playing time of the track and the next disc number. Current disc number Next disc number ALL DISCS DISC 20 1 TRACK 1 2345 MIN SEC 0 28 CD 1 678 NEXT DISC 57 Current track number Playing time of the track To stop playback Press p. OPEN ≠/± ENTER POWER CONTINUE SHUFFLE PROGRAM REPEAT BLOCK 1 BLOCK 2 BLOCK 3 BLOCK 4 BLOCK 5 BLOCK 6 BLOCK 7 BLOCK 8 ENTER OPEN AMS CHECK CLEAR To Pause Resume playing after pause Go to the next disc Go back to the preceding disc Go to the next track Go back to the preceding track Stop playing and remove the disc ·P p Press P P or · DISC SKIP + once. Hold down the button to skip discs. DISC SKIP - once. Hold down the button to skip discs. ± ≠ OPEN and then ENTER. The disc comes to the loading position. 9