Sony CDP-CX335 Operating Instructions - Page 6

Getting Started Connecting Another CD Player If you have a Sony CD player in which 5, 50, 200, or 300 discs can be inserted and which is equipped with the CONTROL A1 (or CONTROL A1) jack and the command mode of that player can be set to CD 3, you can control that player as the second player with this unit. After connecting this unit and an amplifier, follow the procedure below. Be sure to turn off the power of each player before making this connection. To ANALOG OUT COMMAND MODE CDP-CX335 What cords will I need? • Audio cord (1) (Use the cord supplied with the player to be connected.) • Monaural (2P) mini-plug cord (1) (not supplied) 1 Connect the players with an audio cord (see also "Hookups" on page 5). CDP-CX335 2ND CD ANALOG IN OUT L L R R CDP-CX230, etc. LINE OUT L R 2 Connect the players with a monaural (2P) mini- plug cord. CDP-CX335 CONTROL A1II CDP-CX230, etc. CONTROL A1 To an AC outlet To 2ND CD IN To CONTROL A1 To audio output CDP-CX230, etc. To CONTROL A1 For details on this connection, refer to the supplementary "CONTROL A1 Control System" instructions. 3 Set the COMMAND MODE selector of this player to CD 1 or CD 2, and set the command mode of the second player to CD 3. COMMAND MODE CD 123 To an AC outlet To audio input Amplifier : Signal flow To an AC outlet For details on how to operate the second player, see "Controlling Another CD Player" on page 21 and "Playing Alternately" on page 23. 4 Connect the AC power cord of both players to AC outlets. Notes • Do not connect a player other than that you intend to use as the second player to the 2ND CD IN jacks of this player. • When connecting a second CD player, do not connect the DIGITAL OUT (OPTICAL) connector of this unit to the amplifier. 6