Sony CDX-F50M Operating Instructions - Page 9
Receiving a station through a list - list-up, Other functions, Changing the sound settings - source button
View all Sony CDX-F50M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Receiving a station through a list - list-up You can list up the frequency or the name. For details on labeling a station, see page 10. 1 Select the band, then press (LIST). The frequency or station name appears. 2 Press (LIST) repeatedly until the desired station appears. After 5 seconds, the unit returns to normal reception mode. 3 Press (SEEK) -/+ to receive the station. With the card remote commander In step 2, to select the station, press M or m. Other functions Changing the sound settings Adjusting the sound characteristics - BAL/FAD/SUB/AUX You can adjust the balance, fader, and subwoofer volume. 1 Press the select button repeatedly until "BAL," "FAD" or "SUB" appears. The item changes as follows: LOW*1 t MID*1 t HI*1 t BAL (left-right) t FAD (front-rear) t SUB (subwoofer volume)*2 t AUX (AUX volume)*3 *1 When EQ3 is activated (page 9). *2 When the audio output is set to "SUB" (page 10). "ATT" is displayed at the lowest setting, and can be adjusted up to 20 steps. *3 When "AUX" source is selected (CDX-F50M only). 2 Rotate the volume control dial repeatedly to adjust the selected item. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Note Adjust within 3 seconds of selecting the item. With the card remote commander In step 2, to adjust the selected item, press