Sony CMT-EX200 Operating Instructions - Page 16

Timer Falling asleep to music - Sleep Timer You can set the system to turn off after a certain time, so that you can fall asleep to music. Press SLEEP on the remote to select a desired time. Each time you press the button, the minute display (the turn-off time) changes cyclically as follows: AUTO* t 90MIN t 80MIN t 70MIN t ... t 10MIN t OFF * The system automatically turns off after the current CD finishes playing (up to 100 minutes). When the function is TUNER, the system turns off in 100 minutes. Other Operations To Press Check the SLEEP on the remote once. remaining time Change the time SLEEP on the remote repeatedly to to turn off select the time you want. Cancel the Sleep SLEEP on the remote repeatedly Timer function until "OFF" appears. Note When the Sleep Timer is used, you cannot use the Daily Timer. Waking up to music - Daily Timer You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the time" on page 10). 1 Prepare the sound source you want to play. • CD: Place a CD. To start from a specific track, make a program (see "Programing CD tracks" on page 12). • Radio: Tune in a station (see "Listening to the radio" on page 14). • Tape: Make the same setting on the timer of the component connected to the PC/TAPE jacks. 2 Press VOL - or + to adjust the volume. 3 Press CLOCK/TIMER SET on the remote. 4 Press . or > repeatedly until "TIMER SET" appears, then press ENTER on the remote. The hour indication flashes. 5 Set the time to start playing. Press . or > repeatedly to set the hour, then press ENTER on the remote. The minute indication flashes. Press . or > repeatedly to set the minute, then press ENTER on the remote. The hour indication flashes again. 6 Set the time to stop playing following the procedure in step 5. The sound source indication flashes. 16