Sony CMT-EX200 Operating Instructions - Page 21
Messages - hcd
View all Sony CMT-EX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Additional Information Messages One of the following messages may appear or flash in the display during operation. CD NO DISC There is no CD. OVER You have reached the end of the CD while pressing M during play or pause. STEP FULL You tried to program 25 or more tracks (steps). Specifications Main Unit (HCD-EX200) Amplifier section For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 4 ohms loads, both channels driven, from 120 - 10,000 Hz; rated 12 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milli watts to rated output. Canadian model: Continuous RMS power output (Reference): 15 + 15 watts (4 ohms at 1 kHz, 10% THD) Inputs PC/TAPE IN: voltage 250 mV, impedance 47 kilohms Outputs PC/TAPE OUT: voltage 250 mV, impedance 1 kilohms CD DIGITAL OUT: Optical PHONES (stereo mini jack): accepts headphones of 8 ohms or more CD player section System Laser Frequency response Compact disc and digital audio system Semiconductor laser (λ=780 nm) Emission duration: continuous 20 Hz - 20,000 Hz Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range Antenna Antenna terminals Intermediate frequency 87.5 - 108.0 MHz (100 kHz step) FM wire antenna 75 ohms unbalanced 10.7 MHz continued 21