Sony CMT-EX200 Operating Instructions - Page 22
Specifications continued, Sub woofer SA-WEX200, Amplifier Satellite speaker SS-CEX200
View all Sony CMT-EX200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Specifications (continued) AM tuner section Tuning range Antenna Intermediate frequency 530 - 1,710 kHz (with the interval set at 10 kHz) 531 - 1,710 kHz (with the interval set at 9 kHz) AM loop antenna External antenna terminals 450 kHz Satellite speaker (SS-CEX200) Speaker system Speaker units Woofer: Tweeter: Impedance Dimensions Mass 2-way, bass-reflex type 9 cm dia., cone type 5 cm dia., cone type 4 ohms 130 × 220 × 183 mm (w/h/d, incl. projecting parts and controls) Approx 2.0 kg net per speaker General Power requirements Power consumption Dimensions Mass Supplied accessories 120 V AC, 60 Hz 40 watts 1.8 watts (in standby mode) 175 × 222 × 201 mm (w/h/d, incl. projecting parts and controls) Approx. 3.2 kg Remote commander with battery (1) AM loop antenna (1) FM wire antenna (1) Speaker cords (4) Sub woofer (SA-WEX200) Amplifier section For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 4 ohms loads, from 50 - 150 Hz; rated 30 watts per channel minimum RMS power, with no more than 10% total harmonic distortion from 250 milli watts to rated output. Canadian model: Continuous RMS power output (reference): 30 watts (4 ohms at 55 Hz, 10% THD) Speaker system Active sub woofer (magnetically shielded design) Speaker unit 10 cm dia, cone type woofer (×2) Practical maximum output 30 watts Reproduction frequency range 45 - 150 Hz High frequency cut-off range 70 - 150 Hz Phase selector Normal, reverse Input SPEAKER INPUT: Input terminal Output SPEAKER OUTPUT: Output terminal Power requirements 120 V AC, 60 Hz Power consumption 40 watts Dimensions Approx. 150 × 220 × 345 mm (w/h/d, incl. projecting parts and controls) Mass Approx. 6.2 kg Design and specifications are subject to change without notice. 22