Sony CMT-LS1 Operating Instructions - Page 30

Specifications

Page 30 highlights

Specifications Amplifier section For the U.S. model AUDIO POWER SPECIFICATIONS POWER OUTPUT AND TOTAL HARMONIC DISTORTION: With 4 ohm loads both channels driven, from 120 - 10,000 Hz; rated 16 watts per channel minimum RMS power, with no more than 0.9% total harmonic distortion from 250 milliwatts to rated output. North American model: Continuous RMS power output (Reference) 16 + 16 watts (4 ohms at 1 kHz, 10% THD) European model: DIN power output (Rated) 11 + 11 watts (4 ohms at 1 kHz, DIN) Continuous RMS power output (Reference) 16 + 16 watts (4 ohms at 1 kHz, 10% THD) Other models: DIN power output (Rated) 11 + 11 watts (4 ohms at 1 kHz, DIN, 240 V) 11 + 11 watts (4 ohms at 1 kHz, DIN, 220 V) Continuous RMS power output (Reference) 16 + 16 watts (4 ohms at 1 kHz, 10% THD, 240 V) 16 + 16 watts (4 ohms at 1 kHz, 10% THD, 220 V) Inputs TAPE IN (stereo mini jack): voltage 250 mV, impedance 47 kilohms Outputs TAPE OUT (stereo mini jack): 1Vrms at CD Full Bit Play, impedance 1 kilohm CD OUT: Optical PHONES (stereo mini jack): accepts headphones of 8 ohms or more SPEAKER: speaker system 4 ohms CD player section System Laser Laser output Frequency response Compact disc and digital audio system Semiconductor laser (λ=780 nm) Emission duration: continuous Max. 44.6 µW* *This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up Block with 7 mm aperture. 20 Hz - 20,000 Hz (±3.0 dB) Tuner section FM stereo, FM/AM superheterodyne tuner FM tuner section Tuning range North American model: 87.5 - 108.0 MHz (100 kHz step) Other models: 87.5 - 108.0 MHz (50 kHz step) Antenna FM lead antenna Antenna terminals 75 ohms unbalanced Intermediate frequency 10.7 MHz AM tuner section Tuning range North American model: 530 - 1,710 kHz (with the interval set at 10 kHz) 531 - 1,710 kHz (with the interval set at 9 kHz) European model: 531 - 1,602 kHz (with the interval set at 9 kHz) Other models: 531 - 1,602 kHz (with the interval set at 9 kHz) 530 - 1,710 kHz (with the interval set at 10 kHz) Antenna AM loop antenna Intermediate frequency 450 kHz 30

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

30
CD player section
System
Compact disc and digital audio
system
Laser
Semiconductor laser (
λ
=780 nm)
Emission duration:
continuous
Laser output
Max. 44.6 µW*
*This output is the value measured
at a distance of 200 mm from the
objective lens surface on the
Optical Pick-up Block with 7 mm
aperture.
Frequency response
20 Hz – 20,000 Hz (±3.0 dB)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
North American model:
87.5 – 108.0 MHz (100 kHz step)
Other models:
87.5 – 108.0 MHz (50 kHz step)
Antenna
FM lead antenna
Antenna terminals
75 ohms unbalanced
Intermediate frequency
10.7 MHz
AM tuner section
Tuning range
North American model:
530 – 1,710 kHz
(with the interval set at 10 kHz)
531 – 1,710 kHz
(with the interval set at 9 kHz)
European model:
531 – 1,602 kHz
(with the interval set at 9 kHz)
Other models:
531 – 1,602 kHz
(with the interval set at 9 kHz)
530 – 1,710 kHz
(with the interval set at 10 kHz)
Antenna
AM loop antenna
Intermediate frequency
450 kHz
Specifications
Amplifier section
For the U.S. model
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
With 4 ohm loads both channels driven, from 120
– 10,000 Hz; rated 16 watts per channel minimum
RMS power, with no more than 0.9% total
harmonic distortion from 250 milliwatts to rated
output.
North American model:
Continuous RMS power output (Reference)
16 + 16 watts
(4 ohms at 1 kHz, 10% THD)
European model:
DIN power output (Rated) 11 + 11 watts
(4 ohms at 1 kHz, DIN)
Continuous RMS power output (Reference)
16 + 16 watts
(4 ohms at 1 kHz, 10% THD)
Other models:
DIN power output (Rated) 11 + 11 watts
(4 ohms at 1 kHz, DIN, 240 V)
11 + 11 watts
(4 ohms at 1 kHz, DIN, 220 V)
Continuous RMS power output (Reference)
16 + 16 watts
(4 ohms at 1 kHz, 10% THD,
240 V)
16 + 16 watts
(4 ohms at 1 kHz, 10% THD,
220 V)
Inputs
TAPE IN (stereo mini jack):
voltage 250 mV, impedance
47 kilohms
Outputs
TAPE OUT (stereo mini jack):
1Vrms at CD Full Bit Play,
impedance 1 kilohm
CD OUT: Optical
PHONES (stereo mini jack):
accepts headphones of 8 ohms or
more
SPEAKER: speaker system
4 ohms