Sony CMT-M70 Primary User Manual - Page 10

Presetting radio stations (continued) 5 Press MEMORY on the remote. A preset number flashes. PRESET STEREO 1FM1005 TUNED MHz Preset number Frequency 6 Press ./> on the remote repeatedly to select the preset number that you want. 7 Press ENTER on the remote. The station is stored to the selected preset number. 8 Repeat steps 2 through 7 to preset other stations. Tip Press PLAY MODE/TUNING MODE (or TUNING MODE/PLAY MODE on the remote) when you want to stop scanning. Setting presets through manual tuning 1 Press FUNCTION repeatedly until "TUNER" appears in the display. 2 Press TUNER FM or TUNER AM (or TUNER/BAND on the remote) to select FM or AM. 3 Press PLAY MODE/TUNING MODE (or TUNING MODE/PLAY MODE on the remote) repeatedly until "AUTO" and "PRESET" disappear from the display. 4 Press TUNING +/- (or m/M on the remote) repeatedly to tune in the desired station. 5 Press MEMORY on the remote. A preset number flashes. PRESET STEREO 1FM1005 TUNED MHz 6 Press ./> on the remote repeatedly to select the preset number that you want. 7 Press ENTER on the remote. The station is stored to the selected preset number. 8 Repeat steps 2 through 7 to preset other stations. Other Operations To Do this Tune in a station Follow the procedure described in with a weak "Setting presets through manual signal tuning". Stop setting presets Press PLAY MODE/TUNING MODE (or TUNING MODE/ PLAY MODE on the remote). To change the Start over from step 2. preset number To change the AM tuning interval (Except for the European, Middle Eastern and Philippine models) The AM tuning interval is factory-preset to 9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune in any AM station first, then turn off the system. Press and hold TUNING + and TUNER AM. When you change the interval, all the AM preset stations are erased. To reset the interval, tune in any AM station first, then turn off the system. Press and hold TUNING - and TUNER AM. Tips • The preset stations are retained for about a day even if you disconnect the mains lead or if a power failure occurs. • To improve the reception, adjust the supplied antennas or connect an external antenna. Preset number Frequency 10GB