Sony CMT-M70 Primary User Manual - Page 18
Optional Components, Hooking up optional components, Listening to audio from a connected component - instructions
View all Sony CMT-M70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Optional Components Hooking up optional components To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. MD deck / VCR From the audio output jacks of an MD deck / VCR MD deck To the digital input jack of an MD deck A AUDIO IN (MD/VIDEO) jacks Use audio cords (not supplied) to connect an MD deck or VCR to these jacks. You can then listen to analog audio from the MD deck or VCR through this system. B OPTICAL DIGITAL OUT (CD) jack Use a digital optical cable (square, not supplied) to connect an MD deck to this jack. You can then output the digital audio to the MD deck from this system. If the jack is covered with a cap, remove it before use. 18GB Listening to audio from a connected component 1 Connect the audio cords. 2 Press FUNCTION repeatedly until "MD" or "VIDEO" appears. Start playing the connected component. Tip If you cannot select "VIDEO" by pressing FUNCTION repeatedly, turn off the system and then press DSG and FUNCTION at the same time. The function will change from "MD" to "VIDEO", and "VIDEO" will appear in the display. To change back to "MD", repeat this procedure. Recording on a connected component 1 Connect the digital optical cable. 2 Start recording. Refer to the operating instructions provided with connected component.