Sony DAV-DX375 Operating Instructions - Page 60

Other Operations Controlling the TV with the Supplied Remote By adjusting the remote signal, you can control your TV with the supplied remote. Note • When you replace the batteries of the remote, the code number may reset itself to the default (SONY) setting. Reset the appropriate code number. Controlling TVs with the remote Press and hold TV [/1 while entering your TV's manufacturer's code (see the table) using the number buttons. Then release TV [/1. If you set successfully the manufacturer's code, the TV button flashes twice slowly. If the setting is unsuccessful, the TV button flashes 5 times quickly. Code numbers of controllable TVs If more than one code number is listed, try entering them one at a time until you find the one that works with your TV. TV Manufacturer Code number SONY/AIWA 501 (default) DAEWOO 503, 506, 515, 544 FISHER 508, 545 GOLDSTAR/LG 503, 515, 517, 544, 568 GRUNDIG 533 HITACHI 503, 514, 515, 517, 544, 557 ITT/NOKIA 521, 522 JVC 516 LOEWE 515 MAGNAVOX 503, 515, 517, 518, 544, 566 MITSUBISHI/MGA 503, 527, 544, 566, 568 PANASONIC 509, 553, 572 PHILIPS 518, 557, 558 PIONEER 509, 525, 551 RCA/PROSCAN 503, 510, 544 60US Manufacturer SAMSUNG SANYO SHARP TELEFUNKEN/ SABA THOMSON TOSHIBA ZENITH Code number 515, 517, 544, 557, 566, 569, 574 508, 545, 567 517, 535, 565 530, 537, 547, 549, 558 530, 537, 547, 549 535, 541, 551 543, 567 CATV Manufacturer SONY HAMLIN/REGAL JERROLD JERROLD/GI OAK PANASONIC PIONEER SCIENTIFIC ATLANTA TOCOM/PHILIPS ZENITH Code number 821, 824, 825 836, 837, 838, 839, 840 830, 831 806, 807, 808, 809, 810, 811, 812, 813, 814 841, 842, 843 816, 826, 832, 833, 834, 835 828, 829 815, 816, 817, 844 830, 831 826, 827 To control the TV You can control the TV by using following buttons. By pressing You can TV [/1 Turn the TV on or off. TV/VIDEO Switch the TV's input source between the TV and other input sources. TV VOL +/-* Adjust the TV volume. TV CH +/-* Select the TV channel. Number buttons* Select the TV channel. * To use these buttons while in the TV mode (the TV button flashes), press the TV button. - is for selecting a channel number greater than 10. (For example, for channel 25, press -, then 2 and 5.) Note • Depending on the TV, you may not be able to control your TV or to use some of the buttons above. • The TV mode turns off when you do not operate the remote for 10 seconds.