Sony DAV-FC9 Operating Instructions - Page 72

To adjust the volume of all the, speakers at one time

Page 72 highlights

x DISTANCE The default distance setting for the speakers in relation to the listening position is shown below. 3m (10ft) 3m (10ft) 3m (10ft) 3m (10ft) 3m (10ft) Be sure to change the value in the Setup Display when you move the speakers. FRONT 3.0 m/10 ft Front speaker distance from the listening position can be set in 0.2 metre (1 ft) increments from 1.0 to 7.0 metres (3 to 23 ft). CENTER 3.0 m/10 ft Centre speaker distance can be moved up to 1.6 metres (5 ft) closer to the listening position from the front speaker distance, in 0.2 metre (1 ft) increments. SURROUND Surround speaker distance can be 3.0 m/10 ft moved up to 4.6 metres (15 ft) closer to the listening position from the front speaker distance, in 0.2 metre (1 ft) increments. Notes • In SPEAKER SETUP, the North American model's OSD displays both metric and imperial measurements. The other model displays metric measurements only. The manual shows both. • When you set the distance, the sound cuts off for a moment. • If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. • Do not place the surround speakers farther away from your listening position than the front speakers. • The DISTANCE setting is available except for Super Audio CDs. x LEVEL You can vary the level of each speaker as follows. Be sure to set "TEST TONE" to "ON" for easy adjustment. CENTER 0 dB Adjusts the level of the centre speaker (-6 dB to +6 dB, 1 dB increments). SURROUND LEFT 0 dB SURROUND RIGHT 0 dB Adjusts the level of the surround speakers (-6 dB to +6 dB, 1 dB increments). SUBWOOFER Adjusts the level of the subwoofer 0 dB (-6 dB to +6 dB, 1 dB increments). x BALANCE You can vary the balance of the left and right speakers as follows. Be sure to set "TEST TONE" to "ON" for easy adjustment. FRONT Adjusts the balance between the front (CENTER) left and right speakers. To adjust the volume of all the speakers at one time Use the VOLUME control on the system, or press VOLUME +/-. x TEST TONE The speakers will emit a test tone to adjust "LEVEL" and "BALANCE." OFF The test tone is not emitted from the speakers. ON The test tone is emitted from both left and right speakers simultaneously while adjusting balance. When you select one of the "SPEAKER SETUP" items, the test tone is emitted from each speaker in sequence. 72US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92

72
US
x
DISTANCE
The default distance setting for the speakers in
relation to the listening position is shown below.
Be sure to change the value in the Setup Display
when you move the speakers.
Notes
• In SPEAKER SETUP, the North American model’s
OSD displays both metric and imperial
measurements. The other model displays metric
measurements only. The manual shows both.
• When you set the distance, the sound cuts off for a
moment.
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• The DISTANCE setting is available except for Super
Audio CDs.
x
LEVEL
You can vary the level of each speaker as
follows. Be sure to set “TEST TONE” to “ON”
for easy adjustment.
x
BALANCE
You can vary the balance of the left and right
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system, or
press VOLUME +/–.
x
TEST TONE
The speakers will emit a test tone to adjust
“LEVEL” and “BALANCE.”
FRONT
3.0 m/10 ft
Front speaker distance from the
listening position can be set in 0.2
metre (1 ft) increments from 1.0 to 7.0
metres (3 to 23 ft).
CENTER
3.0 m/10 ft
Centre speaker distance can be moved
up to 1.6 metres (5 ft) closer to the
listening position from the front
speaker distance, in 0.2 metre (1 ft)
increments.
SURROUND
3.0 m/10 ft
Surround speaker distance can be
moved up to 4.6 metres (15 ft) closer
to the listening position from the front
speaker distance, in 0.2 metre
(1 ft) increments.
3m
(10ft)
3m
(10ft)
3m
(10ft)
3m
(10ft)
3m
(10ft)
CENTER
0 dB
Adjusts the level of the centre
speaker (–6 dB to +6 dB, 1 dB
increments).
SURROUND
LEFT 0 dB
SURROUND
RIGHT 0 dB
Adjusts the level of the surround
speakers (–6 dB to +6 dB, 1 dB
increments).
SUBWOOFER
0 dB
Adjusts the level of the subwoofer
(–6 dB to +6 dB, 1 dB increments).
FRONT
(CENTER)
Adjusts the balance between the front
left and right speakers.
OFF
The test tone is not emitted from the
speakers.
ON
The test tone is emitted from both left and
right speakers simultaneously while
adjusting balance. When you select one of
the “SPEAKER SETUP” items, the test
tone is emitted from each speaker in
sequence.