Sony DCM-M1 Connect MD DISCAM to your PC - Page 15
Open Network from the Control Panel.
View all Sony DCM-M1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
When you connect the MD DISCAM to your PC, you need to make Windows settings. 1. Open "Network" from the Control Panel. 2. The configuration window of "Network" appears. Select the built-in LAN board (the added board or card in the case of additional installation)and open "Properties". 3. The configuration window of "TCP/IP Properties" appears. Check "Specify an IP address" and set the following. IP Address:192.168.0.1 Subnet Mask:255.255.255.0 Now you have set your PC. Let's move on to the MD DISCAM. Back to MD DISCAM Top page
When you connect the MD DISCAM to your PC, you
need to make Windows settings.
1. Open "Network" from the Control Panel.
2. The configuration window of "Network" appears.
Select the built-in LAN board (the added board or card
in the case of additional installation)and open
"Properties".
3. The configuration window of "TCP/IP
Properties" appears. Check "Specify an IP
address" and set the following.
IP Address:
192.168.0.1
Subnet Mask:
255.255.255.0
Now you have set your PC. Let's move on to the MD DISCAM.
Back to MD DISCAM Top page