Sony DCR-HC36 Operating Guide - Page 20
Step 4: Adjusting the LCD panel and viewfinder, The LCD panel, The viewfinder
UPC - 027242688667
View all Sony DCR-HC36 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Step 4: Adjusting the LCD panel and viewfinder The LCD panel Open the LCD panel 90 degrees to the camcorder (1), then rotate it to the best angle to record or play (2). DISP/BATT INFO 180 degrees (max.) 2 The viewfinder You can view pictures using the viewfinder to avoid wearing down the battery, or when the picture seen on the LCD screen is poor. Viewfinder 90 degrees (max.) 1 90 degrees to the camcorder • Do not press the buttons on the LCD frame accidentally when you open or adjust the LCD panel. • If you rotate the LCD panel 180 degrees to the lens side, you can close the LCD panel with the LCD screen facing out. This is convenient during playback operations. For DCR-HC46/HC96: To turn off the LCD backlight to make the battery last longer Press and hold DISP/BATT INFO for a few seconds until appears. This setting is practical when you use your camcorder in bright conditions or where you want to save battery power. The recorded picture will not be affected by the setting. To turn on the LCD backlight, press and hold DISP/BATT INFO for a few seconds until disappears. • See [LCD/VF SET] - [LCD BRIGHT] (p. 66) to adjust the brightness of the LCD screen. Viewfinder lens adjustment lever Move it until the picture is clear. • You can adjust the brightness of the viewfinder backlight by selecting [LCD/VF SET] - [VF B.LIGHT] (p. 66). • You can adjust the [FADER] and the [EXPOSURE] setting using the viewfinder (p. 60). 20