Sony DCR-HC90 Operating Guide - Page 56
DISP GUIDE, GUIDEFRAME, DATA CODE, REMAINING, REMOTE CTRL Remote control, REC LAMP Recording lamp
View all Sony DCR-HC90 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
STANDARD SET menu (continued) DISP GUIDE See page 15. GUIDEFRAME You can display the frame and check that the subject is horizontal or vertical by setting [GUIDEFRAME] to [ON]. The frame is not recorded. Press DISP/BATT INFO to make the frame disappear. DATA CODE Displays information recorded automatically (data code) during recording. OFF Data code is not displayed. DATE/TIME Displays the date and time. CAMERA DATA (below) Displays camera setting data. This cannot be selected during Easy Handycam operation. 6 0 min 1 0 : 0 0 : 0 0 : 0 0 2 6 5 AUTO 100 AWB F1. 8 9 dB 3 4 SteadyShot off* Exposure* White balance* Gain* Shutter speed Aperture value * Appears only during tape playback. • Camera setting data does not appear when movies on a "Memory Stick Duo" are played back. • The exposure adjustment value (0EV), a shutter speed, and the aperture value appear when still images on a "Memory Stick Duo" are played back. • appears for a picture recorded using a flash. • In the DATE/TIME data display, the date and time are displayed in the same area. If you record a picture without setting the clock and [--:--:--] will appear. REMAINING AUTO Displays the remaining tape indicator for about 8 seconds in situations such as those described below. • When you set the POWER switch to PLAY/ EDIT or CAMERA-TAPE with a cassette inserted. • When you touch (Play/Pause). ON Always displays the remaining tape indicator. REMOTE CTRL (Remote control) The default setting is [ON], allowing you to use the Remote Commander (p. 32). • Set to [OFF] to prevent your camcorder from responding to a command sent by another VCR remote control unit. • The setting returns to [ON] when you have the power source disconnected from your camcorder for more than 5 minutes. REC LAMP (Recording lamp) The camera recording lamp will not light up during recording when you set this to [OFF]. (The default setting is [ON].) BEEP ON A melody sounds when you start/stop recording, or operate the touch panel. OFF Cancels the melody. 56